10
I N S TA L L AT I O N
NARA 2032 P
Step 1 – Installing the flush valve and connecting the water supply
1) Shut off the water supply.
2) Cut an adequate opening in the wall for the dimensions of
the box and the sleeve (not supplied).
3) Insert the electronic flush valve’s box through the opening.
4) Connect the flush valve inlet to the water supply.
5) Connect the flush valve outlet nipple to the pipe leading to
the W.C.’s inlet.
6) Turn on the water supply. Make sure there is no water
leakage.
7) Assemble the temporary protective cover to protect the flush valve.
Step 2 – Connecting the power source
1) Once the electricity, plumbing and tiles works are finished,
replace the temporary protective cover with the plastic seat.
Adjust it using the four screws provided.
2) Now, connect the connectors
going out from the electronic unit:
a. Connect the blue cable connector
to the blue cable connector coming
out from the piezo button.
b. Connect the electronic unit
connector that leads to the
solenoid valve to the solenoid valve
connector.
c. Connect the electronic unit
connector that leads to the power
source to the battery box connector.
