12
SETTINGS ADJUSTMENT
WITH REMOTE CONTROL
FLOW TIME: This function determines the water flushing time once
the user leaves the urinal.
Press the two waves button. Wait until a quick flashing of the red
light of the sensor eye is perceived. Then, press + to increase the
flow time and – to reduce it.
DELAY IN TIME: If required, the delay in time can be modified as
follows:
Press the IN button. Wait until a quick flashing of the red light of the
sensor eye is perceived. Then, press + to increase the delay in time
and – to reduce it.
DELAY OUT TIME: This button changes the time interval the water
starts to flush after the user has left the urinal.
If required, the delay out time can be modified as follows:
Press the OUT button. Wait until a quick flashing of the red light of
the sensor eye is perceived. Then, press + to increase the delay out
time and – to reduce it.
24 HOUR HYGIENE FLUSH: If you have a compatible model with a 24
hours hygiene flush it is possible to enable and disable it.
To activate the hygiene flush, press the clock button. Wait until a
quick flashing of the red light of the sensor eye is perceived. Then
press + to activate the hygiene flush or – to deactivate it.
TEMPORARY OFF FUNCTION: This function is ideal to perform any
kind of activity in front of the sensor without operating the system
(for example, cleaning).
Urinals will remain shut for 1 minute when this button is pressed
once. To cancel this function and to return to normal operation press
the On/Off button again or wait 1 minute.
RESET BUTTON: This function allows the sensor to return to the
original factory preset settings.
If required, press the Reset button and without releasing it, press the
+ button once.
