10
11
9. Electrical Wiring
Caution:
assure that the
transformer is not connected
to the main power line.
Do not perform any electrical wiring
under power.
Connect the power (transformer)
to the faucet electrical connector
and the soap dispenser electrical
connector using the power splitter.
Connect the soap dispenser pump
connector to its matching connector
coming from the electronic unit.
Please note that since the connector
is waterproof, some friction might
have to be applied.
Important:
The 4 contacts connector
should be connected properly so that
the white o-ring is not visible and
a clicking sound is heard.
INSTALLATION
INSTALLATION
F1
10. Powering and Testing the System
Important Note: The
D28/
TUBULAR/QUADRAT
faucet
and soap dispenser system
include the self-adjusting
sensors. The ideal sensor range
for the specific location will be set
automatically.
Before proceeding, check that there
are no foreign objects in front of the
sensors.
Remove the protective stickers that
cover the sensors, both on the faucet
and on the soap dispenser.
Plug in the transformer to the main
power line.
Wait about 10 seconds for the faucet
and the soap dispenser sensors to
complete their self-adjustment.
Put your hands under the Faucet
and the Soap Dispenser and verify
their functionality.
O-RING VISIBLE – NOT CONNECTED PROPERLY
ONLY THE GROVES ARE VISIBLE – CONNECTED PROPERLY
10
SECONDS
To Soap Dispenser
To Faucet
To Power
Caution
: If the 4 contacts connectors are not connected properly, the pump
will work continuously
OBJECT
F2
