4
FAUCET INSTALLATION
Step 1 – Remove all mounting hardware
Shut off the water supply and remove the
hexagonal nut, the disk and the gasket. Do
not remove the O-ring from the base of the
faucet.
Step 2 – Installing the faucet
1. Place the faucet with O-ring into the hole in deck or
lavatory. Make sure the O-ring is located between the
deck or lavatory and the bottom of the faucet.
2. Slide gasket over the flexible hose.
3. Secure the faucet to deck or lavatory with the
hexagonal nut and the disk.
O-Ring
Gasket
Disk
Hexagonal
nut
Step 3 – Connecting the water supply
1. Fit the pipe to the housing of the solenoid valve. Important: inlet and outlet should
follow the indicating arrow at the solenoid housing.
2. Fit the water supply inlet to the adapter at the solenoid valve housing.
Note:
Make sure that the filter is assembled between the housing of the solenoid
valve and the adapter.
Important:
Tubular DM was supplied with Stern’s new Self Adjusting Sensor. The
ideal sensor range for the specific location will be set automatically.
Before proceeding to step 3 check that
no objects are in front of the sensor
besides the washbasin.
Now remove the protecting sticker that
covers the sensor.
