7
ENTRANCE TO THE SELF ADJUSTMENT MODE:
Check that no
objects are in front of the sensor. Press the ADJ button. Once a quick
flashing of the red light of the sensor eye is perceived, remove your
hand holding the remote control from the sensor area. The ideal
sensor range for the specific location will be set automatically. Ones
the self adjustment has taken place the solenoid valve will be opened
and closed for 1 second as an indication that the ideal sensor range
was set and the product is ready for use.
2
SECURITY TIME:
The Security time, prevents continuous flushing
of water due to reflections or vandalism. By default, if the sensor is
covered for more than 90 seconds the water flow will shut automatically.
To resume regular operation any obstruction must be removed.
Press the SEC button. Wait until a quick flashing of the red light of the
sensor eye is perceived. Then, press + to increase the security time
and – to reduce it.
DELAY IN TIME:
The delay in time prevents unwanted activations. It is
recommended to change the delay in time for flush valves for urinals
or toilets only.
If required, the delay in time can be modified also in faucets as
follows:
Press the IN button. Wait until a quick flashing of the red light of the
sensor eye is perceived. Then, press + to increase the delay in time
and – to reduce it.
SETTINGS ADJUSTMENT
Adjusting other settings with the remote control
3
4
DELAY OUT TIME:
This button allows modifying the water flow time
after the user removes his hands from the faucet. A delay out time
close to 0 will save more water. An increased delay out time will make
the user experience more comfortable.
If required, the delay out time can be modified as follows:
Press the OUT button. Wait until a quick flashing of the red light of the
sensor eye is perceived. Then, press + to increase the delay out time
and – to reduce it.
5
