background image

25

LIMITED WARRANTY

Power Vented Tubular Propeller Unit Heaters

1.  The "Manufacturer" warrants to the original owner at original installation site that the above model Gas-Fired 

Heater ("the Product") will be free from defects in material or workmanship for (1) year from the date of shipment 
from the factory, or one and one-half (1-1/2) years from the date of manufacture, whichever occurs fi rst. The 
Manufacturer further warrants that the complete heat exchanger, and burners be free from defects in material or 
workmanship for a period of ten (10) years from the date of manufacture. If upon examination by the Manufacturer 
the Product is shown to have a defect in material or workmanship during the warranty period, the manufacturer 
will repair or replace, at its option, that part of the Product which is shown to be defective.

2.  This limited warranty does not apply:
 

a.  if the product has been subjected to misuse or neglect, has been accidentally or intentionally damaged, has 

not been installed, maintained, or operated in accordance with furnished written instructions, or has been 
altered or modifi ed in any way by any unauthorized person.

 

b.  to any expenses, including labor or material, incurred during removal or reinstallation of the Product

 

c.  to any damage due to corrosion by chemicals, including halogenated hydrocarbons, precipitated in the air

 

d.  to any workmanship of the installer of the Product

3.  This limited warranty is conditional upon:
 

a.  advising the installing contractor, who in turn notify the distributor or manufacturer

 

b.  shipment to the Manufacturer of that part of the Product thought to be defective. Goods can only be returned 

with prior written approval of the Manufacturer. All returns must be freight prepaid.

 

c.  determination in the reasonable opinion of the Manufacturer that there exists a defect in material or 

workmanship

4.  Repair or replacement of any part under this Limited Warranty shall not extend the duration of the warranty with 

respect to such repaired or replaced part beyond the stated warranty period.

5

.  THIS LIMITED WARRANTY IS IN LIEU OF ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, AND 

ALL SUCH OTHER WARRANTIES, INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF 
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED AND 
EXCLUDED FROM THIS LIMITED WARRANTY. IN NO EVENT SHALL THE MANUFACTURER BE LIABLE 
IN ANY WAY FOR ANY CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OF ANY NATURE 
WHATSOEVER, OR FOR ANY AMOUNTS IN EXCESS OF THE SELLING PRICE OF THE PRODUCT OR 
ANY PARTS THEREOF FOUND TO BE DEFECTIVE. THIS LIMITED WARRANTY GIVES THE ORIGINAL 
OWNER OF THE PRODUCT SPECIFIC LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS WHICH 
MAY VARY BY JURISDICTION.

In the interest of product improvement, we reserve the right to make changes without notice.

Summary of Contents for GF-150





























Reviews: