![background image](http://html1.mh-extra.com/html/sterling/allen-bradley-015/allen-bradley-015_instruction-manual_1374522042.webp)
Continuous Loss-in-Weight Blenders
Chapter 3: Installation
42
All alarm parameters are selectable.
If you do not want to use an alarm for a feeder, ensure the corresponding box has an “
N”
in it.
To be enabled, the box must have a “
Y”
in it.
You can also decide to let the Blender continue to Run or Stop if an alarm is active. To do this,
select “
Stop”
or “
Run”
in the boxes on the right.
“Pop-ups enabled”
means the alarms will be shown on the screen. Select “
Pop-ups disabled”
if you don’t want to see the alarms on the screen.
“Extruder flow alarm”
and “
Blender cannot keep up alarm”
can be enabled or disabled
according to costumer requirements.
Communications
All Allen-Bradley Loss-in-weight blenders can be setup to communicate to a host via Ethernet,
an optional Ethernet module must be purchased to allow communications. This can be used for
loss-in-weight extrusion control or for data monitoring. The window below shows how to set
up the 1761ENI Ethernet module.