Sterling Leisure Products Desire Owner'S Manual Download Page 20

Page: 20 / 72

Page 18

For HELP, call 800.749.8003

7. If equipped, press the ON/OFF button

on the left-hand Massage

Sequencer control panel.

8. Press the Pump 2 button

. If Pump 2 has not primed after 3 minutes

repeat same priming procedure of step 3 above for Pump 1. Check and
adjust the water and airflow of every jet from Pump 2 if necessary.

Note

: If equipped, your hot tub automatically tests the four massage sequencers

for 45 seconds (a total of 3 minutes). Please wait for this test to complete before
touching any of the controls.

For two 1-speed pump models

, press the Pump 2 button a second time to

turn it off.

For two 2-speed pump models,

press the Pump 2 button a

second time to turn it on high and again to turn it off. A built-in timer
automatically turns Pump 2 off after 20 minutes.

10. Press the ON/OFF button

on the right-hand Massage Sequencer control

panel.

11. Press the Pump 3 button

(if equipped). If Pump 3 has not primed

after 3 minutes repeat same priming procedure of step 3 above for Pump 1.
Check and adjust the water and airflow of every jet from Pump 3 if
necessary.

Note

: Your hot tub automatically tests the four massage sequencers for 45

seconds (a total of 3 minutes). Please wait for this test to complete before
touching any of the controls.

12. Press the Pump 3 button a second time to turn off Pump 3. A built-in timer

automatically turns Pump 1 off after 20 minutes.

13. Press the Light button

to turn the Light on. Press this button again to

cycle through the five colors (red, blue, green, white, and yellow). Once a
desired color is found, pressing this button again stays on this color.

14. Press the Light button again to turn it off. A built-in timer automatically turns

the Light off after two hours.

15. Press the Next Page button

16. Press the Blower button

to turn on the air blower (if equipped).

Check that air goes to the air jets on the bottom of each seat.

17. Press the Blower button again to turn the Blower off. A built-in timer

automatically turns the Blower off after 20 minutes.

Note

: When temperature limits allow, a circulation pump and ozone generator

run continuously to help keep your water clean.

Summary of Contents for Desire









































































Search results

Summary of Contents for Desire

Reviews:

Related manuals for Desire

Brands by name

Popular brands

Sterling Leisure Products Desire, Owner'S Manual

Search results

Summary of Contents for Desire

Reviews:

Related manuals for Desire

Brands by name

Popular brands