Steris VividImage MON-STE19HD Operation Manual Download Page 3

Page: 3 / 22

Document #

Revision Date

82070-243, Revision F

3 of 22

11/24/2009

For a complete list of current certifications, please refer to the Specifications page of this manual.

UL Classified. See complete marking on product.

UL Classified part numbers:

MON-STE19HD
MON-STE21HD

MON-STE19HDM
MON-STE21HDM

The UL Classified part numbers above include a power supply, model WSZ712M, manufactured by
Jerome Industries Corporation.

Recognized under the Component Recognition Program of Underwriters Laboratories Inc.

UL Component Recognition part numbers:

MON-STE19HDR
MON-STE21HDR

MON-STE19HDMR
MON-STE21HDMR

The UL Component Recognition part numbers above do not include a power supply.

The table below associates the Model Numbers that are UL Classified and Recognized with the STERIS
Part Numbers for same.

UL Classified Model Numbers

STERIS Part Numbers

STERIS Part Numbers
with Integrated Microphone

VTS-19-HD003 MON-STE19HD

MON-STE19HDM

VTS-21-HD003 MON-STE21HD

MON-STE21HDM

UL Recognized Model Numbers

VTS-19-HD003R MON-STE19HDR

MON-STE19HDMR

VTS-21-HD003R MON-STE21HDR

MON-STE21HDMR

Summary of Contents for VividImage MON-STE19HD























Search results

Summary of Contents for VividImage MON-STE19HD

Reviews:

Related manuals for VividImage MON-STE19HD

Brands by name

Popular brands

Steris VividImage MON-STE19HD, Operation Manual

Search results

Summary of Contents for VividImage MON-STE19HD

Reviews:

Related manuals for VividImage MON-STE19HD

Brands by name

Popular brands