Steris VHP X10, Operator'S Manual

Page: 22 / 50

3-2
10087252 Operator Manual Operating Instructions
• All Biodecontamination Cycle data is output to a USB interface in
encrypted format for data storage.
• Biodecontamination Unit is easily transported in a light weight
and IP20 rated case (with retractable handle and wheels).
• A separate AR60
™
Aerator is available for catalyzing sterilant for
applications requiring faster aeration time.
• The X10 Biodecontamination Unit is multi-lingual (English,
French, Spanish, Italian and German) and available in either 120
or 230 Vac, single phase electrical service.
• To minimize exposure to liquid Sterilant during handling, the
system uses specially designed disposable Cups containing
approximately 70 mL of Vaprox 59 Hydrogen Peroxide Sterilant.
3.2 Operation
NOTE: The STERIS X10 Biodecontamination Unit is to be used by
Trained and Certified Applicators who have successfully completed
both the STERIS Training and Certification Course for applicators of
Vaprox 59 Hydrogen Peroxide Sterilant and the STERIS X10
Biodecontamination Unit Operator Course. Certification must be
active and in force for all Applicators of Vaprox 59 Hydrogen Peroxide
Sterilant.
3.2.1 Attach to Enclosure
The following information is intended to enable a Trained and
Certified Applicator to properly attach the Biodecontamination Unit
to an Enclosure (refer to
S
ECTION
2.1, T
ERMS AND
D
EFINITIONS
):
1. Review site-specific FMP* and verify all accessories are present
(if applicable) and proper location of Biodecontamination Unit.
2. Consult with facility officials on Safety Precautions, security,
warning placards and other facility requirements.
3. Position Biodecontamination Unit and any needed accessories
cases near Enclosure (see
Figure 3-1 ).
NOTE: Ensure Biodecontamination Unit is within 10’ (3 m) of the
facility power outlet. Use of extension cords is not recommended.
*Guidance for developing a suitable Fumigation Management Plan can be found in
STERIS publication (P129383-938) or searching EPA website (epa.gov) for the key
words ’Vaprox Package Insert.’
WARNING – PERSONAL INJURY AND/OR EQUIPMENT DAMAGE HAZARD:
• Lifting Biodecontamination Unit requires more than one person. The unit weighs approximately 68 lb
(31 kg).
• Place the Biodecontamination Unit only on flat surfaces. Various internal components are
designed for operation when Unit is placed on a level, flat surface.
• Ensure the Biodecontamination Unit is positioned so access to power switch and facility outlet
are not restricted.
• Integrated (temperature and humidity) sensors are fragile. Do not bang, twist or crush.
Biodecontamination Unit does not operate properly with a damaged sensor.