Document #OPM/1300, Revision B
CONFIDENTIAL
© 2013 Copyright VTS Medical Systems, LLC
14 of 29
Off
– A PIP window is not displayed.
On
– A PIP image from a second channel (see PIP Source Selection below) is displayed in a
window within the main image. When PIP is set to ON, the following PIP Adjustments are enabled:
PIP Size - There are eight size selections (1-8) available for the PIP window. The default is
four.
H Position - The H position setting adjusts the horizontal (left/right) positioning of the PIP
window on the screen.
V Position - The V position setting adjusts the vertical (up/down) positioning of the PIP window
on the screen.
PIP Transparency- This function enables the PIP window to be set to varying levels of
transparency. The default is 0.
Side by side
– Displays the main image and PIP window side by side and scaled to the vertical size
of the panel. The unused areas of the panel are displayed in black.
PIP Source Selection- Press “
” and “Enter” simultaneously, then press “
” to select the PIP source. PIP
has to be ON to select a PIP source (to turn PIP ON choose Layout then PIP in the OSD menus or use the
hot keys “
” and “Enter”). There is an option to show All sources or Active sources. If Active sources is
selected, the Active sources (sources that are connected and powered on) will be highlighted.
Important Note on PIP
: Please see PIP Matrix below for the signal types that can be used as the primary
and secondary input channel for PIP and Side by side.
Signal
(Connector)
'#
$%
$ %
$ #%
#
$
%
""
!
$#&(%
$#&(%
#
$%
"#
$%
'#
$%
$ %
$ #%
#
$%
""!
!
$#&(%
$#&(%
#
$%
"#
$%
X = signals can be used as primary and secondary channels for PIP.
Table 1: PIP Matrix
