manualshive.com logo in svg

Steris RLM26HD3C, Operation Manual

Share
Download
Steris RLM26HD3C Operation Manual Download Page 5

Document #OPM/1300, Revision B

 

CONFIDENTIAL 

© 2013 Copyright VTS Medical Systems, LLC

 

 

 

5 of 29 

Tips and Safety Precautions 

 

 

-  Image persistence on LCD monitors is caused 

by the continuous display of static graphics on 
the screen for extended periods of time.  Do not 
display a static image for more than eight (8) 
hours.  An afterimage may remain. 

-  

To prevent image persistence, 

power off the monitor when not in 
use, especially at the end of the 
day. 

-  It may be difficult to see the image if the 

brightness is adjusted to the minimum setting. 

-  The quality of the video signal may influence the 

quality of the displayed image. 

-  Do not open the monitor casing.  
 

Monitor and Accessory Checklist  

 

Part Numbers: RLM26HD3C, 
RLM26HD3CNPWR, RLM26HD3MC, and 
RLM26HD3MCNPWR 

 

-  Included in the carton are the following items: 

1 HD3 Monitor 
1 Cable Cover  

(attached to the back of the monitor) 

1 Power Supply* (RLM26HD3C and 

RLM26HD3MC only) 

1 Power Cord  (RLM26HD3C and 
RLM26HD3MC only) 
8 Mounting Screws  
   (screwed into the back of the monitor) 
1 Quick Start Guide 
 

*Use only the Jerome Industries power supply, 

model WSX624M included in the carton. 

 

Notes: 

-  Retain the carton and packing material for 

transporting the monitor. 

 

Mounting 

-  Mounting the monitor to a boom arm requires 

two people. 

-  Always follow mounting instructions to avoid 

physical injury and/or damage to the monitor. 

 

 

Location 

-  Use the monitor in a suitable environment.  See 

“Operating Temperature” and “Storage 
Temperature” on the Specifications page of this 
manual.  

-  Even though the monitor is classified as surgical 

/ medical grade, use caution around liquids as 
you would with any electrical appliance.  

-  Do not insert objects into the monitor. 
-  Do not place the monitor on unstable surfaces.   
-  In all cases, refer to the specifications in this 

manual to ensure proper monitor performance.  
Use of the monitor outside of operating 
specifications will void the monitor warranty and 
may cause permanent damage to the monitor. 
 

-  Note: This product contains fluorescent lamps; 

please follow local ordinances or regulations for 
disposal. 

 

Power Cord 

-  Do not damage the power cord.  

Damage to the cord may result in fire 
or electric shock. 

-  Do not add extension cords.   
-  Use only the power cord and power supply 

included with the monitor.   

-  Insert the power plug directly into the AC outlet. 
-  Do not remove or insert the power plug with wet 

hands.  Doing so could result in electric shock.

 

 

Manual Scope 

-  This manual is written for use with 

RLM26HD3C, RLM26HD3CNPWR, 
RLM26HD3MC, and RLM26HD3MCNPWR. 
When describing a different specification / 
function between the monitors, the part number, 
is given.  When the part number is not given, the 
description is true for all monitors.  For product 
appearance, illustrations of part number 
RLM26HD3C are used in this manual.  The 
integrated microphone in models

 

RLM26HD3MC and RLM26HD3MCNPWR is 
operational only when the monitor is connected 
to an integrated video system, sold separately. 

 

 

Summary of Contents for RLM26HD3C






























Reviews:

No comments

Brands by name

Popular brands

Load more brands