stereophonic FEVER PITCH, User Manual

Page: 7 / 8

MIDI
Fever Pitch features full and comprehensive MIDI implementation. Every single function and
knob may be controlled by MIDI.
The pedal will accept USB MIDI at any time, or may be used with 1/4” MIDI by setting
M.JACK = MIDI in the Global configuration menu. The pedal will respond to MIDI messages
sent on the channel set in the Global menu only.
The 1/4” MIDI input is compatible with the Neo MIDI Cable, Neo Link, Disaster Area MIDIBox 4,
5P-TRS PRO, or 5P-QQ cables. Most other 1/4” compatible MIDI controllers should work, the
pedal requires pin 5 connected to TIP and pin 2 connected to SLEEVE.
Command MIDI CC Range
LVLA
50 0-127
LVLB
51 0-127
LVLC
52 0-127
LVLD
53 0-127
DRY
74 0-127
TUNA
54 0-127
TUNB
55 0-127
TUNC
56 0-127
TUND
57 0-127
SCAL
75 0-127
PANA
58 0-127
PANB
59 0-127
PANC
60 0-127
PAND
61 0-127
DRY PAN
76 0-127
REVERB (DLY RPT)
62 0-127
PREDELAY (DLY TIME)
63 0-127
RVB TONE (DLY PAN)
64 0-127
RVB MIX (DLY MIX)
65 0-127
DELAY SUBDIVISION
77
MIDI BEAT CLOCK
Delay mode only
Command MIDI CC Range
TREM RATE
66 0-127
TREM DEPTH
67 0-127
CHORUS RATE
68 0-127
CHORUS DEPTH
69 0-127
TREM MODE
78 0 TREM, 32 PAN,
64 TR+D, 96 PN+D
VOLUME
70 0-127
TONE
71 0-127
RAMP RATE
72 0-127
RAMP TRIGGER
73 0 MOM, 44 TOGG,
88 REPT
DETUNE
79 0 OFF, 127 ON
MODE SELECT
49 0 REV, 127 DLY
TAP TEMPO
93 ANY
RAMP TRIGGER
97 ANY
EXPRESSION PDL
100 0 HEEL, 127 TOE
BYPASS
102 0 BYP, 127 ON
GLOBAL CONFIGURATION
To enter the global setup menu, first hold down the Page knob (lower left), then press the left
footswitch.
Turn the Page knob to select the parameter you want to change, then turn the Data knob
(lower right) to set its value.
Hold the Page knob to save your settings and exit the menu.
M.JACK EXPRESSN MultiJack is expression pedal input
FOOT. SW MultiJack is foot switch input
MIDI MultiJack is MIDI input (requires MIDI to TRS adapter)
CHANNL
Sets MIDI input channel
BYPASS NORMAL Hard bypass
TRAILS
Trails bypass, allows reverbs or delays to ring
RPHASE NORMAL R / DRY output phase normal
INVERT
R / DRY output phase inverted
STEREO MONO IN
INPUT jack is mono, outputs are stereo
INP. SUM INPUT jack sums to mono, outputs are stereo
STEREO
INPUT jack is stereo, outputs are stereo
MONO I+O INPUT jack is mono, outputs are dual mono
SUM MONO INPUT jack sums to mono, outputs are dual mono
We recommend using MONO I+O mode if you only have one amp connected
PRESET Sets number of presets available on device. Does not affect MIDI.
DISPLY STATIC
Display does not show bars or moving values
MOVING Display shows animated value bars
CC OUT OFF Pedal does not send MIDI CC values
JACK Pedal sends MIDI CC from MultiJack
USB Pedal sends MIDI CC from USB MIDI
BOTH Pedal sends MIDI CC from both
BRIGHT Sets display brightness
EXP LO
Sets the heel down calibration for the MultiJack expression pedal
EXP HI
Sets the toe down calibration for the MultiJack expression pedal
RETURN Pedal will retun to the main control page after 5, 10, 30 seconds, or disable.
PWR ON
Choose BYPASS or ENGAGE to set the power-on state of the pedal
RESET Turn to reset CONFIG, PRESETS, or ALL. Hold MODE to reset.
Set to MIDI DUMP to export the pedal presets over USB MIDI.
CHANNL
BYPASS
STEREO
1 / 4 CFG v1.01a
EXPRESSN
001
NORMAL
MONO+DRY
M.JACK