REVERB AND DELAY
We’ve incorporated a flexible time-based effect section to fill out your sound with Fever Pitch.
The pitch shifters and dry signal all feed a reverb and delay engine with stereo capabilities.
Tap the PAGE knob to switch between Reverb and Delay modes, as shown on the REVERB /
DELAY page.
PITCH SHIFTING
Dialing in usable musical intervals can be challenging, so we’ve given you a little help.
Navigate to the TUNING page and turn the lower right knob to select from one of our
preset scales. The intervals listed below are in semitones from your input pitch.
UNI:
0, 0, 0, 0
MIN1:
0, +3, +7, +12
OCT1:
-24, -12, +12, +24
MAJ2:
-12, -7, 0, +4
OCT2:
-12, +12, -12, +12
MIN2:
-12, -7, 0, +3
O5TH:
-12, -7, +7, +12
MAJ7:
0, +4, +7, +11
5THS:
-7, 0, 0, +7
MIN7:
0, +3, +7, +10
MAJ1:
0, +4, +7, +12
OCT5:
-12, -7, -12, -7
You can also create your own custom scale that will be available for use in any preset.
Turn the lower right knob until one of the User scales is shown (USR1-4,) then tweak
the intervals. Hold down the PAGE knob, then keep it held until the scale saved
message appears.
Finally, don’t forget you can just manually input any pitches you like! You don’t need to
use the scales at all, they are just here to help.
Now that we’ve seen the big picture, let’s explore some of the hidden details in Fever
Pitch: the heart of the pedal is the pitch-shifting section, with four independent voices.
1 FEVRPTCH
LVLA
LVLB
LVLC
LVLD
DRY
MAIN
1 FEVRPTCH
TUNA
TUNB
TUNC
TUND
SCAL
TUNING
Use the MAIN page as a mixer to set the
blend of voices you’d like to hear. You can dial
in any ratio of voices, including all wet or just
the dry signal.
+12
-12
+24
----
USR2
Each shifter has its own tuning control that
ranges from +1 to -1 octaves, as well as +2
and -2 settings.
These are shown on the display in half-steps
(semitones) from -24 to +24.
At unison pitch, the display will show “----.”
1 FEVRPTCH
PANA
PANB
PANC
PAND
DRYP
PAN
^
The PAN page allows you to position each
voice across the stereo spectrum. The display
shows “^” when a voice is centered in the
stereo field.
MODULATION EFFECTS
We’ve also packed two independent modulation effects into the output section of Fever
Pitch. Use the MOD.FX page to dial them in.
REVB - reverb decay time
PDLY - reverb pre-delay time
TONE - reverb tone and damping
RMIX - reverb mix
TDIV - not used in reverb mode
1 FEVRPTCH
REVB
PDLY
TONE
RMIX
TDIV
REVERB
----
REPT - delay repeat / feedback
TIME - delay time
DPAN - delay signal pan position
DMIX - delay mix
TDIV - tap division (TRIP, 8TH, DOT8, QTR)
or disable MIDI clock (NCLK)
1 FEVRPTCH
REPT
TIME
DPAN
DMIX
TDIV
DELAY
DOT8
^
Fever Pitch will respond to tap tempo and MIDI clock in delay mode only. Set the Tap
Division to NCLK to disable MIDI clock.
TREM - tremolo / pan speed
DPTH - tremolo / pan depth
CHOR - chorus / vibrato speed
DPTH - chorus / vibrato depth
MODE - tremolo / pan mode
1 FEVRPTCH
TREM
DPTH
CHOR
DPTH
MODE
MOD.FX
PAND
The tremolo / pan effect has four different modes:
TREM: tremolo effect on wet signals, both left and right channels have the same modulation
PAN: panning effect on wet signals, left and right channels have opposite modulation
TR+D: tremolo effect on wet and dry signals, this produces the most intense tremolo
PN+D: panning effect on wet and dry signals, this produces the most intense panning.
The modulation effects do not respond to tap tempo or MIDI clock.
