ENGLISH
ENGLISH-2
Before using your new AC Measurement Accesory read this
instruction manual to prevent any damage. Put it away in a
safe place for future references.
IMPORTANT
In order to keep this device clean, clean it with a soft dry rag
Do not use solvents or any other liquids
Any adjustments or repairs to this device must be made by a
quali
fi
ed technician
SECURITY INFORMATION
Your new measurement accessory has been designed
according to the IES-1010 security requirements. Read the
operation requirements in order to verify that this accessory is
used in a safe manner.
Precautions and Preperation for making measurements
Do not apply voltages to the output connectors
Do not use or store this accessory in areas with high tempera-
tures or high humidity
Do not make current measurements before the device is com-
bined with a DMM.
If this device is used near devices that generate noise, the
voltage output may become unstable or generate errors.
This device should not be used in conductors without an
isolator, with voltage above 250 VAC rms, or 250 VDC.
SYMBOLOGY
For important security information, refer to this manual’s security
section.
Double isolation (Protection class II)
Before using your new AC Measurement Accesory read this
instruction manual to prevent any damage. Put it away in a
safe place for future references.
This device should not be used in conductors without an
isolator, with voltage above 250 VAC rms, or 250 VDC.