MEASURING DC CURRENT
1.- Connect the red testing point to the jack signaled “+VmA
Ω
”
and the black testing point to the jack signaled “COM”.
2.- Set the dial to the VAC setting.
3.- Connect the red testing point to positive polarity and black
testing point to negative polarity, in the circuit to be measured.
4.- Read the current value. Please refers to next table:
If you performs DC measures over 250mA, change the red
testing point to +10A
MEASURING DECIBELS
1.- Connect the red testing point to the jack signaled “+ VmA
Ω
.
)))” and the black testing point to the jack signaled “COM”.
2.- Set the dial to the 10 VAC setting.
3.- Connect the testing points to the circuit to be measured and
read the dB value.
BATTERY TEST
1.- Connect the red testing point to the jack signaled “+ VmA
Ω
.
)))” and the black testing point to the jack signaled “COM”.
2.- Set the dial to the BATT 1,5V setting.
3.- Touch the positive terminal of the battery with the red
testing point and the black testing point place it in “-“ terminal of
the battery.
CONTINUITY TEST
1.- Set the dial to the ))) setting.
2.- Connect the testing points to the circuit to be measured.
3. The buzzer will sound if the circuit is a conducer.
Dimensions: 160x88x40 mm
Weight:
277g including batteries
ENGLISH
ENGLISH-5
Test
Position
Factor
50
μ
A
X1
2,5mA
X0,01
25mA
X0,1
250mA
X1
10A
X1
DC current
If you performs DC measures over 250mA, change the red
testing point to +10A