ENGLISH
ENGLISH-06
INSTALLATION
Before beginning the assembly of this kit, it is necessary to have a
pencil type soldering iron and soldering solution. Adult supervision is
recommended during assembly
Place the resistances in their respective positions (R1-R4). Solder
the terminals on their underside and cut off the excess metal.
Place the diodes in their respective positions (D1-D4). Solder the
terminals on their underside and cut off the excess metal.
Place the DB9 connectors in their respective positions (J1-J2).
Make sure that the J1 is the jack and J2 the plug. Solder the
terminals on their underside and cut off the excess metal
Place the relays in their respective positions (K1-K4). Solder the
terminals on their underside and cut off the excess metal.
Place the transistors in their respective positions (Q1-Q4). Solder
the terminals on their underside and cut off the excess metal
Solder the power cables in their respective positions (BT1). The
power input voltage is 5 volts.
1.
2.
3.
4.
5.
6.
Summary of Contents for K-415
Page 1: ......
Page 8: ...DIAGRAM ENGLISH ENGLISH 08...
Page 11: ......
Page 18: ...DIAGRAMA ESPA OL ESPA OL 08...