Steren JMP-100, Instruction Manual

Page: 28 / 36

11 11
The air compressor gauge and power switch are located on the rear of the power
station. The compressor air hose, placed around the unit.
1. Unfasten the air hose and extend it.
2. Position the power station in order to see the front panel.
3. Make sure the nozzle lever is positioned up (away from the nozzle opening).
Using the air compressor
Never connect or disconnect the nozzle while the compressor is
operating.
Before any tire inflation, look for the recommended inflation pressure
information on the sidewall of the tire.