88
Charging Socket
cator
Make sure the supplied current adapter
is to be powered by the correct voltage
(110 V
~
). Use only the adapter supplied
with this unit.
1. Make sure all power station switches are
set to off.
2. Open the cover on the charging jack.
3. Connect the charging adapter to an
outlet and into the power station’s charging
jack. The charging Indicator flashes during
the charging process.
The initial charge in the battery can take up
to 24 hours. Do not charge for more than
48 hours.
4. After charging the battery, disconnect
the adapter from the AC outlet first, then
from the charging jack. Then replace the
dust cover on the charging jack.
Charging the power station
Charging Socket
LED Work Light
USB Indicator
USB
5V@500mA
USB Switch
USE
Batter
te t
te t
FUSE
Sa
et
Switch
Low
ed
igh
Light Switch
During charge, the indicator light is red, and will turn from red to green
when charging is complete.
Summary of Contents for JMP-100
Page 1: ......
Page 18: ......
Page 23: ...6 6 13 Pressure indicator 14 Air compressor switch 15 Air hose...
Page 35: ......
