Steren JMP-100, Instruction Manual

Page: 27 / 36

10 10
The 12 V power output is located in the front of the power station.
1. Remove the dust cover from the 12 V
DC power output.
2. Make sure all power station switches
are set off.
3. Insert the accessory plug into the
power port and into the device you want
to charge.
4. After use, disconnect the accessory
plug and replace the power port’s dust
cover.
5. Recharge the power station as soon as convenient.
12 V power output
Charging Socket
LED Work Light
USB Indicator
USB
5V@500mA
USB Switch
FUSE
Battery
test test
ON
OFF
FUSE
Safety
Sw
itc
h
Low Med High
Light Switch