User's Manual 32
Onboard FDC Control
This item specifies onboard floppy disk drive controller. This setting allows
you to connect your floppy disk drives to the onboard floppy connector.
Choose the "Disabled" settings if you have a separate control card.
Onboard UART1/2
This item is used to define onboard serial port 1/Port2 to
3F8/IRQ4
,
2F8/
IRQ3
,
3E8/IRQ4
,
2E8/IRQ3
,
Auto
or
Disabled
.
Onboard UART 2 Mode
The main board support IrDA(HPSIR) and Amplitudes Shift Keyed
IR(ASKIR) infrared through COM 2 port. This item specifies onboard Infra
Red mode to
HPSIR
,
ASKIR
or
Standard (Disabled)
.
IR Duplex Mode
This item specifies onboard infrared transfer mode to
full-duplex
or
half-
duplex
.
Onboard Parallel Port
This item specifies onboard parallel port address to
378H
,
278H
,
3BCH
or
Disabled
.
Parallel Port Mode Mode
This item specifies onboard parallel port mode. The options are
SPP
(Standard Parallel Port),
EPP
(Enhanced Parallel Port),
ECP
(Extended
Capabilities Port), and
EPP+ECP
.
ECP Mode Use DMA
This item specifies DMA (Direct Memory Access) channel when ECP
device is in use. The options are DMA
1
and DMA
3.
This item will not show up when SPP and EPP printer mode is selected
Paralle Port EPP Mode Type
This item specifies EPP type when EPP device is in use. The options are
EPP1.7
and
EPP1.9.
This item will not show up when SPP and ECP parallel mode is selected