User's Manual 13
Clear Password - JP9
Allows system password to be cleared by shorting jumper JP9 and turning
the system on, "
Password is cleared by jumper, (JCP) !
" message will
be shown on power-on screen. The system should then be turned off and
the jumper JP9 should be returned to OPEN to restore normal operation.
The procedure should only be done if the user password has been
forgotten. (This function is not available when AMD K5 or Cyrix 6x86
CPU is in use)
Display Mode Jumper - JP7
Factory Reserved Jumpers - JP39, JP43, JP44
On the HOT-557 mainboard remain three jumpers for future use.
Normally, those jumpes were defualt by the manafacturer and need not to
change by the user.
JP39 is a three pin header and default on pin 2-3 closed by a cap.
JP43 is a two pin header and default on closed by a cap.
JP44 is a three pin header and default on opened.