Source Display Testing:
1.
If the HDMI cable is not correctly connected to the display tester and/or to the source device
there will be a pop up box on the tester display showing “No Signal”.
(Fig 10)
(Fig 10)
2.
A successful playback test will result in picture and audio playback on the display tester.
(Fig 11)
(Fig 11)
3.
If the display tester does not show the source image or play sound please check that the source
device is powered on, set for playback and set for HDMI video/audio output.
Input Resolution Test
1.
Follow the Source Display Testing section shown above and while in HDMI Display Mode, press
the
③ Menu
button. The current input resolution will be shown at the bottom of all menu
screens
Trouble Shooting:
1.
If the display does not show the image you are trying to display or there is no sound, please
remove the HDMI cable from the “Source Input” port and re-insert it. This should solve the issue.
