Tech Support:
consumer.steppir.com/support | 425.453.1910 | [email protected]
8
Section 2:
Remove the two black plastic thumbscrews on the center element, and insert a straight element fiberglass
support into each side of the center element, as shown in
Figure 5.
Make sure each fiberglass support is fully seated within the element
Reinstall each plastic thumbscrew, fastening them against the fiberglass support tube .
Do not overtighten! Doing so may crush or otherwise damage the fiberglass support tube
SY3 SYSTEM ASSEMBLY: SY3 ANTENNA
Figure 5
