DU-AG-0021-25 Rev C 1/09/07 GCX Corp. Page 1 of 7
Installation Guide
Philips MP20/30/40/50 IntelliVue
VHM Wall Mount Kit
The purpose of this guide is to:
1. Describe attachment of Table Top Mount to Mounting Adapter.
2. Describe attachment of Mounting Adapter to VHM Arm.
3. Describe mounting of VHM Arm in the Wall Channel.
4. Describe mounting the monitor on the Arm.
5. Describe Operation and Adjustment of VHM Arm.
Parts Reference
The following parts and hardware are included with this installation kit (hardware not shown):
Tools Required
Phillips screwdriver (not provided), 1/8'' and 5/32'' [4mm] hex wrenches (provided), 1/2'' socket wrench (provided).
WARNING!
The VHM Arm contains a strong spring which is used to counterbalance the weight of the mounted
device. The Arm housing should never be disassembled by non-GCX personnel. Additionally, the
mounted device should only be removed with the Arm in its highest vertical position, with the Height
Locking Lever in the fully locked position. Failure to follow these guidelines could result in serious injury.
Before mounting the Arm:
1. Note that this arm has a wide range of motion both up/down and side to side. Please consider carefully the device
being mounted and the proximity of the assembly to other equipment, hospital personnel, and the patient. GCX
recommends that the hospital’s risk management personnel verify the appropriateness of the application prior to
installation and use.
2. If assistance is needed regarding an application, please contact a GCX product specialist at (800) 228-2555.
Item #
Description
Qty
1
VHM Arm with Mounting Adapter
1
2
Locking Lever, Height Adjustment
1
3
Cable Clip, VHM Arm
2
4
M6 x 8mm FHMS
2
5
M6 x 12mm FHMS
1
6 1/8''
Hex
Wrench
7
5/32'' [4mm] Hex Wrench
1
8
Wall Channel Cover, 16''
1
9
1/2'' Socket Wrench
1
*10 Spacer,
MP20/30
1
*11
M6 x 16mm Pan Head Machine Screw (PHMS)
2
*See "MP20/30 with non-Table Top Mount" (page 3) for use of these parts.
10
3
1
2
