DU-AG-0021-25 Rev C 1/09/07 GCX Corp. Page 2 of 7
Height Locking Lever
Attaching the Philips-supplied Table Top Mount to the Mounting Adapter
Installation Note:
Do not attach the Table Top Mount to the Arm/Mounting
Adapter if you will be mounting an MP20/30 monitor with the mounting
interface shown in photo (right). See "Mounting the Monitor" (page 3) for
instructions specific to this type of mounting interface.
1. Fasten Philips-supplied Table Top Mount to Mounting Adapter with one (1) M6 x 12mm FHMS and two (2) M6 x 8mm
FHMS (see below).
Mounting VHM Arm in Wall Channel
1. Thread the Height Locking Lever into the mounting hole in the right side of the
Arm. The Lever operates by turning clockwise to tighten or counterclockwise to
loosen. Ensure that the Locking Lever is in the locked position before mounting
the Arm in the channel.
Do Not Attach Table Top Mount if MP20/30
Monitor Has This Mounting Interface
M6 X 12mm FHMS (1)
M6 X 8mm FHMS (2)
Mounting Adapter
Table Top Mount
