Tech Support:
consumer.steppir.com/support | 425.453.1910 | [email protected]
15
Section 2:
Creating, selecting, and modifying an antenna configuration is done using the OptimizIR EMC on the
Analytics Tower. After the device is powered on, you will see the interface shown in
Figure 10
1.
Status Menu. Shows current device state, frequency, and configuration.
2.
Connection Status.
3.
Configuration Control. Select, create, and delete configurations.
4.
Antenna Control. Go to a specific frequency, retract or recalibrate elements, or fine tune element lengths.
SY3 SYSTEM USER GUIDE: SETUP FOR TUNING
1
2
3
4
Figure 10
