10
2112 116TH AVE NE SUITE 1-5, BELLEVUE WA, 98004
WWW.STEPPIR.COM
TEL: (425)-453-1910 FAX: (425)-462-4415
WIRING THE CONTROL CABLE FOR THE ANTENNA SWITCH
Locate the following kits:
QTY 1
72-0053-01 Antenna Cable Kit
QTY 1
70-3001-01 COAX Switch Assy
Refer to figure 6 for assembly hardware required for this step.
Follow
figure 5
for wiring the control cable to the Coax Antenna Switch
Once wired correctly, the cable must be pulled through the drain hold on the lid of the Coax
Antenna Switch.
The loose end of the control cable will be wired to the terminal housing or connector junction box,
if this option was purchased. This procedure will be completed in a later step of the assembly
process. For now, let the control cable hang unattched while the coax antenna switch is mount-
ed to the antenna.
DO NOT secure the lid and gasket to the enclosure until the final testing has been completed.
Figure 5
Control Wiring for Coax Antenna Switch
Inside view of Coax Antenna Switch
Control Cable
(Other end will be wired to
the terminal housing or con-
nector box)
