Stephill Generators SSDP30-70 - DSE 6110 Module User Guide
Issue 2
Engine Battery Voltage
Fig.15
Engine Run Time
Fig.16
Engine Fuel Level
Fig.17
Service Hours
How to Check the Generator Fuel Level
Fig.19
Viewing the Fuel Level Without Starting the Generator
Fig.20
The
Engine Fuel Level
screen will then show the
percentage of fuel remaining in the fuel tank. Also you
can see the quantity of fuel remaining, this is shown in
litres.
To be able to view the fuel level page use the "
How to Check the Engine Instruments
" section elsewhere in
this guide. Depending on the engine state, running or at standstill, you will see one of two screens showing
the current fuel level.
Fig.18
Fig.19 shows no registered fuel level, this is the fuel
level screen when the generator is at standstill (not
running). At this state the fuel level sensor is not
energised.
To view the fuel level you must first navigate to the
Engine Fuel Level
screen - as above. Then using the
Tick
Button
, press and hold. After a few seconds the fuel level screen should then register a fuel level. You must
continue to hold the
Tick Button
down to continue to view the fuel level - Fig.20.
Engine Battery Voltage
14 . 4
V
14 . 5
V
Battery
Charge Alt
Engine Run Time
28
Start(s)
196h 12m
Engine Fuel Level
++++
%
Engine Fuel Level
28
%
98
Litre
Service Hours
303h 48m
Engine Fuel Level
28
%
98
Litre
Tick Button
JD/08/18
9
