Operating Instructions Artec
6
2 Technical
Description
Driven by customer requests and requirements, the ARTEC model series had been
designed and developed as a compact universal version. At the same time high quality-
standards and maximum economy has been achieved.
The elementary structure ensures a good overview and quick allocation and adjustment of
parameters for the respective unit components. The ARTEC anesthesia unit is an
inhalation anesthesia unit that is equipped with a anesthesia agent specific vaporizer for
use in a semi-closed system
The unit consists of a basic housing of stainless steel in which a drawer is provided.
Located above that is the gas-mix unit (GME, with which the available medical gases O
2
,
N
2
O and (optional) compressed air can be dosaged.
The GME consists of an integrated pneumatic unit with relvant safety valves providing for
N
2
0 block and O
2
deficiency signal and the dosage unit for the above-mentioned medical
gases.
On the right-hand side, an anesthesia agent specific vaporizer can be mounted on special
mounting racks ( one or two-fold).
Located on the basic unit and depending on model, there is provided a stainless steel shelf
for additional monitoring or a ventilation module with integrated monitoring.
On the reverse side of the unit there are standard connections for gas supply linea and
depending on model, holding racks for reserve bottles with integrated high-pressure
reducers.
The unit is also equipped with four plug sockets for electrical power supply for additional
monitors. These sockets are constantly supplied with current regardless of the Ventilators
ON/OFF power supply status.
2.1 Possible Expansion and Upgrading of the Unit
Basic Model
The ARTEC basic model is suitable for wall mounting. For such mounting, the mounting
rails of the basic unit ar attached to the V
2
A rails.
For wall mounting, exact vertical mounting of the unit must be strictly observed, otherwise
inexact mounting could lead to falsh measuring results of gas flows. An adjustable
distancer device provides a precise alignment of the unit.
Unit Model with Mobile Stand
The unit can be mounted on a mobile stand that enables and ensures variable site
operation.
The basic unit can be mounted on the mobile stand profile (80x30) by tightening the four
mounting bolts. The mobile stand can be equipped with a stand-alone oxygen,
compressed air and vacuum generator module „STAXEL“