STEPCRAFT MM-1000, Operating/Safety Instructions Manual

Page: 19 / 26

19
4.3 T
OOL
C
HANGE
A
TTACHMENT
/ S
WITCH
-B
OX
Never touch the tool! There exists a serious risk of injury!
In order to change a tool holder manually, press the tool change button on the Switch-Box and extract
the tool holder.
The tools are clamped without any additional collets into the tool holders. Use a narrow 14 mm spanner
and a 17 mm spanner for this purpose.
4.4 E
MERGENCY
S
TOP
S
WITCH
The emergency stop switch is located on the front of the STEPCRAFT CNC System. Pressing the
emergency button leads to an emergency stop of the machine. The machine will stop immediately (see
point 10 of the respective instruction).
Actuate the emergency stop switch only in emergency situations!
NOTICE: Actuating the emergency stop will result in immediate machine shutdown and can cause step
and data losses.
Controlled cessation of the machine´s operation can only be effectuated via the control software.
To cancel the emergency stop status, turn the emergency stop switch to the right. Then the control is re-
enabled. The work process must be restarted.
The entire system is controlled and operated by the PC.
Prior to first usage, read the manual of your control software thoroughly and carefully,
making sure that you have understood everything.
For questions regarding the control software, please contact the respective software developer.
5 T
ECHNICAL
S
PECIFICATIONS
5.1 D
IMENSIONS AND
W
EIGHT OF THE
T
OOL
C
HANGE
A
TTACHMENT
Length / Diameter = 100 mm / 56 mm
Weight = 0,585 kg
Clamping neck = 43 mm (Euro neck)
5.2 O
THER
C
HARACTERISTICS OF THE
T
OOL
C
HANGE
A
TTACHMENT
Holding system = SK15 (STEPCRAFT Design)
Collets = ER11 (1-8 mm)
Operating pressure = 8-10 bar, integrated sealing air ventilation
Max. rotational speed = 28.000 rpm
True-running accuracy = 0,02 mm out of the center
Housing = Aluminum 7075, anodized
6 T
RANSPORT
/ S
TORAGE