13
Pulse Technical Manual
A100K11311
3.3
Configure Call Button on IP Substation
The call button on the IP Substation can be configured via the Pulse
Server.
● Use a web browser and log into the Pulse Server station (e.g. IP
address: 169.254.1.99)
●
Select
Server Management
>
Server Configuration
>
Direct
Access Key Settings
● Select the station on which you want to program the Call Button
-
The Call Button is
Input Button 1
●
Under
Value
enter the directory number to call when the button is
pressed.
3.4
Modify Pulse Station Profiles
The Station Profile defines a set of service features and parameters that
are available for a group of stations.
The Pulse system can have five station profiles:
● Profile 1 - Default
● Profile 2 - Substation
● Profile 3 - Display station
● Profile 4 - Operator
● Profile 5 - Gateway
The following service features and parameters are included in the
station profile:
● Door opening including remote I/O
● Outgoing call restriction
● Group Call and Busy Override restriction
To modify station profiles:
●
Select
Server Management
>
Station Profiles
