INSS0711
Fan mode
The activation of the Fan mode is similar to the Celsius/
Fahrenheit adjustment. To activate or deactivate the
Fan mode, you must press down the (+) and (-) buttons
simultaneously for at least 3 seconds while in Day mode.
Once the 3 seconds have passed, the SET icon will blink.
At this point, release the buttons. You must then press down
the (-) button to activate or deactivate the Fan mode. The Fan
icon will turn on or off depending on the case.
When Fan mode is activated, the heating cycle is established
at 15 minutes. The deactivation of the Fan mode will cause
the thermostat to go back to the heating cycle previously
programmed. Once the adjustment finished, we can exit the
Fan mode by not pressing on any button for 5 seconds.
