INSSTCP15MA0116
14
the selection. However, doing so will not impact on the
erasing.
3. Simultaneously press down the + and – buttons to erase
the period programming. The hour displays --:-- and the set
point displays -- to indicate that the programming is erased.
4. The erased period number blinks and you can select another
period to be erased or exit the Programming mode following
one of the 3 methods described above.
preprogrammed mode
The Preprogrammed mode allows an automatic programming
of the thermostat. 252 preprogrammings have been defined for
mode and 252, for
mode (A0 to Z1 and 0 to 9; see
appendix 1 to consult the corresponding tables). This mode
gives you the possibility to quickly program the thermostat
using preprogrammings commonly used without having to do
it manually.
As from the Automatic mode, it is possible, at any time, to
manually adjust the set point. This set point will be effective until
the next set point change anticipated by the preprogramming.
Note that if the set point is lowered to off (--), the programming
will not be effective.
From this mode, the screen displays the
/
temperature,
the
/
set point, the hour, the day of the week and the
letter and current number of the preprogramming (A0 to Z1 and
0 to 9; alpha-numeric segment displayed on the right-hand side
of the hour; see appendix 1).
choice of the preprogramming
You can only access the Preprogramming mode when the
thermostat is out of any programming or adjustment function.
Make sure to choose the preprogrammings corresponding to
the right mode (
or
, according to the attached tables).
You must proceed as follows to access the Preprogramming
mode:
Summary of Contents for STCP
Page 60: ......
