INSSTCNP15MA0612
1. Description
The STCNP non programmable electronic thermostat can be
used to control heating floors with electrical current − with a
resistive load − ranging from 0 A to 16 A at 120/208/240 VAC.
It has an easy user interface. It keeps the temperature of a
room (
mode) and a floor (
mode) at a requested set
point with a high degree of accuracy.
Floor Mode
(factory setting)
This control method is ideal in areas where you want a hot
floor at any time and when the temperature of the ambient air
can be high without causing discomfort.
Ambient Mode
(you only have to press down the
A/F button to switch from one mode to the other)
This control method is ideal when you want a stable ambi-
ent air temperature (without fluctuation). Usually, this mode is
used in large and often occupied rooms where temperature
variations can be uncomfortable. For example, in a kitchen, a
living room or a bedroom.
Some factors cause variations in ambient air temperature.
They include large windows (heat losses or gains due to out-
side temperature) and other heat sources such as a central
heating system, a fireplace, etc. In all these cases, the
mode will ensure a uniform temperature.
This Thermostat is not compatible with the following
installations:
• electrical current higher than 16 A with a resistive load
(3840 W @ 240 VAC, 3330 W @ 208 VAC and 1920 W @
120 VAC);
• inductive load (presence of a contactor or relay);
• central heating system.
3
