INSSTCNP15MA0612
the 24-hour cycle, the thermostat will return to the Night
mode and start a new cycle. It is thus not necessary
to readjust the Smart mode when a manual change is
made to the Day/Night mode. If the thermostat is set off
(--), the Smart mode will be deactivated.
When the power is restored after a power failure for example,
the Smart mode is deactivated and its corresponding icon is
blinking. The icon will stop to blink as soon as you will press
down a button.
Display in Degrees Celsius/Fahrenheit
The thermostat can display the ambient temperature and
the set point in degrees Celsius (standard factory setting) or
Fahrenheit.
Adjustment procedure for degrees Celsius/Fahrenheit dis-
play.
1. To switch from the degrees Celsius to the degrees Fahren-
heit, and conversely, the thermostat must be from the Day
mode. If so, simultaneously press down the + and - buttons
for more than 3 seconds until the icon blinks.
2. Press down the + button to switch from the degrees Cel-
sius to the degrees Fahrenheit, and conversely. The degree
Celsius or Fahrenheit symbol is displayed.
3. When the adjustment is completed, do not press down any
button during 5 seconds to exit the adjustment function.
/
Mode
To switch from the
mode to the
mode, or conversely,
press down the A/F button (when you are not in any adjustment
mode). Then, the temperature set point will become the same as
the
or
mode temperature, as applicable.
Safe Mode
If the thermostat fails to detect the presence of a floor
sensor, it will automatically revert to
mode at a setpoint
of 21°C. (with a maximum set point temperature of 24°C)
12
