INSSTCNP5MA0612
Night/
/
), the Smart mode, the Security mode, the maxi-
mum set point of the Security mode, the Celsius/Fahrenheit
mode, the remaining time of the timer and the maximum floor
temperature. These parameters are saved every minutes
when a change occur, except for the Day/Night mode and
the remaining time of the timer, which are saved only if the
Smart mode was not activated.
Please note that the Smart mode is not automatically reacti-
vated when the power is restored, the
icon blinks to in-
dicate that this mode was activated before the power failure
and that is now deactivated. Moreover, when the power is
restored, the Day/Night mode is recovered only if the Smart
mode was deactivated before. If not, the Day mode is auto-
matically reactivated. The Security mode is also reactivated if
it was activated before the failure. However, its icon blinks for
5 minutes and you can deactivate this mode by simultane-
ously pressing down the + and - buttons for 10 seconds. The
Security mode stays activated if you don’t follow this process
and the icon stops blinking.
15
