stellar labs Surf Skis, Manual

Page: 3 / 11

Footbrace:

To adjust the angle of the footbrace pedals, untie the steering lines from the bow bulkhead. If you wish to
adjust the foot pedals to a more vertical position, tighten the line. If you wish for them to move towards
the bow, loosen the steering line. Make sure to check the rudder alignment if you adjust the tension on
the rudder line. If it is out of alignment, you can adjust the tension on one line to bring it in line.
Tighten the line = more vertical pedals Loosen the line = more reclined pedals

To adjust footstraps, remove the neoprene pad around the nylon webbing and then you can open the
strap to tighten or loosen the fit. Once adjusted, replace the neoprene pad to keep your feet from chafing

(Pre 2012 Boats)To adjust the footbrace fore and aft, loosen the wing-nuts on the side of the footbrace
and open the cam on the heel track. Once loose, you can move the footbrace fore and aft.
Starting in 2012, the top tube-end fittings are fastened with plastic cams

To operate the Quick Release footbrace, you need to open the 2 upper plastic cams and then the lower
central aluminum cam along the keel. When you open the plastic cams, you need to flip 180 degrees and
then press down on the top firmly. This will help disengage the teeth on the cam bolts from the teeth in
the plastic tracks.