Page 11
INS_GALAXY SERIES_BY REV C
5 - MANTEL REQUIREMENTS
NON-COMBUSTIBLE ZONE
1/2” [13mm] MIN
NON-COMBUSTIBLE
FACING MATERIAL
MUST BE USED BETWEEN THE
TOP OF THE FIREPLACE AND 6“ ABOVE.
COMBUSTIBLE MATERIAL MAY COVER THIS.
6” [152 mm] MINIMUM
GLASS VIEWING AREA
BOTTOM 3” TRIM
TOP 3” TRIM
1/2” [13mm] MIN
NON-COMBUSTIBLE
FACING MATERIAL
COMBUSTIBLE MANTEL
COMBUSTIBLE HEARTH
APPLIES TO BOTH SIDES
AND ENDS IF USING A
MULTI-SIDED FIREPLACE
COMBUSTIBLE FACING
MATERIAL
TOP OF FIREBOX
GALAXY SAFE-T-TOUCH
SINGLE SIDED: RIGHT SIDE VIEW
Figure 5
4 - FRAMING
NOTE: Framing dimensions should allow for wall covering thickness and fireplace facing materials. When using a hearth,
adjust rough opening size as necessary to maintain at least minimum clearance requirements.
If masonry is to be used (optional), prepare the necessary foundation for the masonry load. When masonry construction is being used, a lintel must be
used over top of fireplace to support the added weight. Build hearth to desired size and height. If a hearth extension is desired, combustible material
may be used.
CAUTION: Install fireplace on metal, concrete or hard wood surface extending the full width and depth of fireplace.
CAUTION: Vent cap location must be in compliance with guidelines on pages 15-19
of this manual.
