Page 7
INS_GALAXY SERIES_BY REV C
2 - FIREPLACE SPECIFICATIONS
C. INSTALLATION OVERVIEW
1.
Frame an opening for fireplace, allowing for vent installation.
2.
If masonry (optional) will be used, prepare foundation for the masonry load. A lintel is required to support the added weight above the fireplace.
3.
Install hearth if desired.
4.
Insert fireplace into framing.
5.
Double check clearances to combustibles.
6.
Complete gas line installation.
7.
Complete electrical hook-up.
8.
Complete venting installation.
9.
Install facing material, mantel or cabinetry.
10.
Install logs or glass and ember material or media.
11.
Verify proper operation of fireplace and all components.
D. PLACEMENT CLEARANCE REQUIREMENTS
•
This fireplace must be installed on a level surface capable of supporting the fireplace and venting.
•
Fireplace must be placed directly on wood or non-combustible surface (not linoleum or carpet) extending entire depth and width of fireplace.
•
This fireplace may be installed in a bedroom.
NOTE: The qualified installer should follow the procedure best suited for the installation.
