Stellar Hearth Products
Page 13
7B - GLASS LOG SET INSTALLATION
(Sets 4—6)
8 - CONNECTING POWER TO THE GLASS LOG SET
The Images insert requires 110/120 VAC electrical power for operation
1. Locate the 3-pronged electrical cord and route it out of the firebox opening.
If the cord is not long enough to
reach the outlet, use a grounded extension cord of at least the same gauge to connect the log set to an
electrical outlet.
2. Plug in to the nearest outlet.
3. If desired, additional glass beads can be purchased through your Stellar Hearth dealer.
4. The insert is now ready for operation. Turn the gas supply on at its source.
Glass Set 6
Log 12—
Log 9—
Step 8
Locate Set 6, Logs 9 & 12
Place Log 9 on top of Log 4. The slot in the bottom of Log 9 rests into the slot on top of Log 4. Place Log 12 on top of Log 3.
The slot in the bottom of Log 12 rests into the slot on the top of Log 3. Figure 7B.9 (Also use Figure 7B.1 for reference)
9
Figure 7B.9
12
