9
Home Automation System Integration
The SP-1 Stereo Processor is compatible with home automation systems via the RS232
connector on the rear socket panel.
Installation
Using a Rack System
The SP-1 Stereo Processor is, depending on the order, shipped with foot rails for free-
standing placement or rack mounts. To install the rack mounts, turn the SP-1 Stereo
Processor upside down and place it on a stable, even surface. Take care to place it on a soft
surface to avoid scratches. Using a TORX 10 screwdriver, fasten the rack brackets in the
designated holes.
Reminder: The SP-1 Stereo Processor should be installed with at least one inch of free
space on all sides, and it should be placed in an environment free of excessive heat. When
placed in a rack system, the SP-1 Stereo Processor should be placed at the bottom of the
rack, with the Steinway Lyngdorf amplifiers above it. This allows for proper dissipation of the
heat generated by the amplifiers without adverse effects on the SP-1 Stereo Processor.
Installing the USB Streaming Audio Driver on a Computer
To stream audio from a PC or Mac to the SP-1, you need to install the driver for the SP-1 on
your computer. The driver can be found on the USB key from the accessory kit.
Mac users:
Go to the “Drivers USB for SP-1” folder
Select the Mac folder and double-click the SL-AUDIO file.
Windows users:
Go to the “Drivers USB for SP-1” folder
Select the Windows XP or Windows 7 folder, depending on your Windows installation.
Double-click “Setup32” if you have a 32 bit systems and “Setup64” for 64 bit systems.
Using the USB Streaming Audio Input
To stream music to the SP-1, connect your computer and SP-1 with a USB cable, select
“USB” as input on the SP-1, and start playing music / video* files on your computer.
*To stream audio and video with the SP-1 Stereo Processor, the video must be streamed to
the video display and the audio streamed to the SP-1 through the “USB Streaming audio
input.” In the instance that the streaming audio and video are not synchronized correctly,
