7
Changing the Batteries
The remote is shipped with two AAA batteries. If the SP-1
Stereo Processor does not respond to remote control
commands, it may be because the remote control batteries
need to be replaced. To change the batteries, use a Phillips
Head screwdriver (PH1) to remove the locking screw from the
battery compartment.
The locking screw is at the base of the remote control. When
you have removed the locking screw, the battery compartment
is automatically ejected from the bottom of the remote control.
Remove the used batteries and replace them with two AAA-size
alkaline batteries. Insert the battery compartment and tighten
the locking screw.
