ASSEMBLY OF MODEL C MUSIC SYSTEM
Removing the Bottom Plate
Remove the wooden bottom plate. Lay the speaker on its side, remember to place one of the foam
protection plates from the shipping crate below the speaker stand for secure support.
Spikes or Feet for Speakers and Head Unit
The speakers and the head unit are designed to stand on each four spikes or feet. The system
accessories box contains three mounting options.
a. 12 pieces of 28 mm high spikes for wooden floors or floors covered with ordinary carpet.
b. 12 pieces of 48 mm high spikes for floors covered by thick carpet.
c. 12 pieces of non-penetrating feet mainly for marble, granite or similar floor materials.
Spikes are the most stable option but might cause damage to the floor below; therefore, the use of
spikes will be each customer’s own responsibility. Steinway Lyngdorf cannot take any responsibility
for any damages caused by spikes. Choose the non-penetrable feet if there are any concerns about
potential harm to floors.
NOTE: The feet have rubber facing to protect the floor. Do not push or drag the speakers when they
are standing on the feet, as the rubber may be ripped off and damage may occur to the floor.
10
Summary of Contents for C
Page 1: ...MODEL C INSTALLATION MANUAL VERSION 2 0 Skriv tekst ...
Page 5: ...5 ...
