UNPACKING MODEL C MUSIC SYSTEM
Pull out the Clip-Lok opening tool by using two fingers.
Place the tool behind the clip. Use your other hand to keep the clip in place when you unlock it.
Otherwise the clip may cause damage when it springs out of grip.
Unpacking and Handling Loudspeakers
The loudspeakers are very heavy. Therefore, a minimum of four people will be necessary to unpack
and install the system.
During moving and handling, do not tilt the boxes more than 90 degrees. It might be best to unpack
the system outside the building in which the installation is to be made.
The crates have been assembled using the Clip-Lok packaging system. The clips must be removed
with the tool supplied inside the corner of the boxes as illustrated.
WARNING: Be very careful when you unlock the clips. They are firmly fixed and may cause
damage when they spring open, unless you keep the clips in place with your free hand as
illustrated.
Once you have unclipped the box, remove the top. The speakers are bolted to two wooden plates
equipped with handles and lifting points. In the right channel speaker box, in a small compartment on
the speaker front facing wall, you will find two levers for later moving usage and an Unbraco fastener
for removing the transport fittings on top and bottom of the speakers.
After unclipping the top of the crate, remove the side wall as illustrated. The speakers are bolted to
two wooden plates equipped with handles and lifting points. Carefully slide out the speakers and
place them firmly on the ground. Using the supplied steel levers, you can now carry the loudspeaker.
6
Summary of Contents for C
Page 1: ...MODEL C INSTALLATION MANUAL VERSION 2 0 Skriv tekst ...
Page 5: ...5 ...
