09-282C
1 - 1
3/96
INTRODUCTION
section 1
Description
The Steiner Chipper/Shredder is designed to grind, shred, and chip a variety of materials into a use-
able processed material to enrich, beautify and landscape. Mounted on the front of the Steiner 4-wheel
drive articulated frame tractor enables the chipper/shredder to be used in a variety of locations.
Small materials such as leaves, yard and garden debris (cornstalks, plants, prunings, vines, etc.) can
easily be processed through the shredder inlet. Sticks and branches should be limited to 1-1/2 inches in di-
ameter and no longer than 24 inches to avoid excess whipping and wrapping. The processed material can
be placed in a compost pile or spread on the ground as mulch, giving a professionally landscaped look.
The chipper inlet can chip branches up to 4 inches in diameter. Several small branches can be
grouped and fed into the chute together. The chipper can reduce a pile of branches and brush into useful
and attractive decorative landscape chips.
Summary of Contents for CS312
