background image

IMPORTANT MESSAGE  

Thank you for purchasing this Schiller Grounds Care, Inc. product

 You have purchased a world class product,  

one of the best designed and built anywhere.   

This product comes with an Owner / Operator’s Manual. The useful life and good service you receive from this  
product  depends  to  a  large  extent  on  how  well  you  read  and  understand  this  manual.  Threat  this  prod-
uct  properly and adjust it as instructed, and it will give you many years of reliable service. This manual has been  
provided to assist in the safe operation and servicing of your attachment.  

See a Schiller Grounds Care, Inc. dealer for any service or parts needed. Schiller Grounds Care, Inc, service  en-
sures that you continue to receive the best results possible from Schiller Grounds Care, Inc. products. You  can  
trust  Schiller  Grounds  Care,  Inc.  replacement  parts  because  they  are  manufactured  with  the  same  high  
precision and quality as the original parts.  

Schiller  Grounds  Care,  Inc.  designs  and  builds  its  equipment  to  serve  many  years  in  a  safe  and  pro-
ductive  manner. For longest life, use this product only as directed in the manual, keep it in good repair and follow 
safety  warnings and instructions. You’ll always be glad you did.  

NOTE:

 All photographs and illustrations in the manual may not necessarily depict the actual models or attach-

ment,  but  are  intended  for  reference  only  and  are  based  on  the  latest  product  information  available  at  
the  time  of  publication.  

Familiarize yourself fully with the safety recommendations and operating procedures before putting the machine 
to  use. Carefully read, understand and follow these recommendations and insist that they be followed by those 
who will  use this attachment.  

This manual should be kept for future reference.  

Please check if you have received all the parts for your kit with the list of the bag and the list of the box.  

Schiller Grounds Care, Inc.  

One Bob Cat Lane  

Johnson Creek, WI  53038-0469   

TABLE OF CONTENTS  

PAGE  

DESCRIPTION / SPECIFICATIONS  ..................................................................................................................   2  
SAFETY   ............................................................................................................................................................   3  
SAFETY DECALS   .............................................................................................................................................   6  
ASSEMBLY INSTRUCTIONS   ...........................................................................................................................   7  
INSTALLATION  ..................................................................................................................................................   9  
ADJUSTMENTS & REMOVAL   ........................................................................................................................   10  
OPERATION   ....................................................................................................................................................   11  
SERVICE   .........................................................................................................................................................   12  
TROUBLESHOOTING   ....................................................................................................................................   14  
PARTS SECTION   ............................................................................................................................................   16  
TORQUE SPECIFICATION TABLE   .................................................................................................................   26  
OPTIONS  .........................................................................................................................................................   27   

Summary of Contents for 75-71231

































Reviews: