Sprocket guard installation:
1. Adjust the hydraulic motor (item 1) by loosening
the three nuts on the carriage bolts (item 2)
that hold the hydraulic motor in place. Do not
remove the nuts.
2. Slide the motor towards the chute (item 3) as
shown (the grooves on the motor’s sprocket
must match those of the rotation ring). Adjust and
retighten the nuts. Tighten firmly.
3. Install the sprocket guard (item 4) as shown
and secure in place with two 1/4’’ x 1/2’’ bolts
(item 5).
WARNING
Operate only when all the guards are in place.
8
ASSEMBLY INSTRUCTIONS
Summary of Contents for 75-71231
