Steiner 75-71231, Owner/Operator'S Manual & Illustrated Parts List

Page: 14 / 32

SERVICE SCHEDULE
TO PREVENT INJURIES: STOP THE MOTOR. APPLY PARKING BRAKE. REMOVE THE IGNITION KEY.
DISCONNECT THE WIRE FROM THE SPARK PLUG(S) AND KEEP AWAY FROM SPARK PLUG(S) TO
PREVENT ACCIDENTAL STARTING
.
Daily:
- Check for any damage on the hydraulic hose. The hydraulic hose must be replaced if there is any
small damage.
-
Check for any signs of loose bolts and tighten as needed. Check mounting bolts at frequent inter-
vals for proper tightness in order to prevent costly repairs. Make sure your snowblower is in
safe working condition.
- Check skid shoe (see installation section).
- Check from to time the wearing on the cutting edge to make sure you do not wear out the base of the
snowblower’s chassis. This cutting edge is reversible. All you have to do is unscrew the bolts and
turn the cutting edge, reinstall and tighten the bolts securely.
50 Hours:
- Check drive belts for proper tension and signs of cracking.
100 hours:
- Change the oil in the gear box after the first 100 hours of use. Then change after every 2500 hours or
every 6 months. The type of oil used: S.A.E. grade 80W90.
- The gear box should have a total of 500 ml of oil or filled above the output shaft (see figure).
Grease
fitting
12
Oil fitting
SERVICE