12
STEINDORFF
®
3.2.1.
Setting the specimen (Figure 19 and Figure 20)
Set the specimen in the center of the stage.
To obtain the best observe effect, please select the
containers, such as culture dish and culture bottle, with
the bottom thickness is 1.2mm, and the same thickness
is also required by the object slide when it is laid the
specimen.
o
Using the Φ35mm culture dish:
You can lay aΦ35mm culture dish on the stage directly by
using the standard center board
①
of the stage
o
Using the mechanical ruler:
1.
When using the 96 bit or 24 bit micro-titration board,
please fasten it tightly by the stage clips
②
.
2.
When fastening other model boards, please use the
following supplied brackets with mechanical ruler:
Teraski bracket
③
for Teraski board
Culture dish bracket
④
for Φ35mm culture
dish
Object slide bracket
⑤
for object slide and
Φ54mm culture dish
3.
Turning the transverse knob
⑥
and lengthways knob
⑦
, move the specimen to the required position.
Movement Range: 120mm (width) × 78mm (Length).
3.2.
Stage
3.2.2.
Moving the specimen
Turn the knob of the mechanical ruler or use your hands directly to move the specimen to the position you wanted.
Be careful when you replace the objective, please, especially after a short work distance observation.
Not let the objective to touch the stage inserted plate or the culture dish bracket.
Figure 19
Figure 20
